login   |    register

Scale Modeling Sponsors

See Your Ad Here!

Black Dog [ MORE REVIEWS ] [ WEB SITE ] [ NEW STORIES ]

In-Box Review
135
Four Mini Display Bases
Four Mini Display Bases
  • move

by: Darren Baker [ CMOT ]


Originally published on:
Armorama

Introduction

Black Dog has been producing resin bases for some time now, but this is the first time I have had a chance to give them an examination. This particular offering consists of four bases for the display of an individual 1/35th scale figure on each.

Contents

This offering from Black Dog is packaged in a reasonably sized end opening card box. The box does have an image of the painted stands on the front, inside of the box is a single Ziploc bag which holds the four resin bases and two additional detailing parts. Black Dog also add foam peanuts to help protect the contents during transit and storage.

Review

This offering from Black Dog is definitely going to appeal to the figure modellers out there, there is very little required in the form of preparation and assembly; this means that the painters can crack on with the fun part of adding the paint and various little details that will give each base a unique look. The bases are not attached to casting blocks as such, a light sanding on a flat surface is all that will be required to clean up these bases. One of the bases has been provided with separate cactus throng detail that can be used in a number of ways. Otherwise the only other preparation I would suggest is to give them a good wash in order to remove any dust from the sanding process and to get rid of any release agent that may be present.

The four bases are square and measure 38mm x 38mm, this provides plenty of room to display a figure in a standing, crouched or seated position, but there is not enough room to display a 1/35th scale figure in a prone position. An examination of the mouldings resulted in my finding zero defects, no air bubbles or missed detail, perhaps most importantly there are no sticky areas which I have encountered in some resin products by other manufacturers. The only issue I have found is that some of the bases were not level when curing and so the sanding process will be a little more time consuming that it would have otherwise been.

The bases offered cover a rocky outcrop with Nopal cactus throngs, if I have correctly identified the cactus genus then this would be locked down to Mexico, but I may have the wrong genus of cacti. Regardless of this the cacti can be used individually, attached one to the other or not at all. This particular base only has room for a standing figure.

The next base I looked at is a flat wooded area with a tree stump remaining. This base is ideally suited to a seated figure as the tree stump looks pretty much an ideal size and even the tree ring detail has been provided. It should be noted that the tree stump having a flat top means it was cut down using mechanical device and not an axe, even sawing by hand leaves a different finish than is presented here. As such this base is not suitable for displaying an ancient figure,

The third base I looked at consists of a cobblestone floor and pedestal with a cap stone. The pedestal is of a brick construction and so depending on how it is finished could be used with a figure from as early as the Roman Empire. This particular base would be ideal for displaying a figure leaning against the pedestal, or perhaps looking at a map laid on top of it. Depending on how you utilise this base it could be displayed with the back being the front instead.

The fourth and final base in this offering provides a wooden log barrier on a soil base, for me World War One jumped into my mind, but again this type of defensive structure has been used for a very long time, it is likely as old as warfare itself. This particular base could accommodate a couple of figures, such as a figure providing another with a light. Regardless of your decisions the log balustrade at the back does offer a nice back drop to a scene.

Conclusion

These four resin bases by Black Dog are very well moulded, and other than some of them not having been perfectly level when poured, I cannot fault them. The diversity of finish offers a huge range of display options as regards time periods and locations. I really like this aspect of the bases as the raised areas draw the eye of the viewer. All told this is an excellent selection of vignette bases for the display of your figure masterpieces.
SUMMARY
Highs: The high quality finish of the bases is very good.
Lows: The only possible fault I can come up with is that some of the bases were not level when poured and so sanding will take longer.
Verdict: The options as regards time period makes these well worth seeking out, you could use them with every warrior from the past to the future, just about.
  Scale: 1:35
  Mfg. ID: D35069
  Related Link: 
  PUBLISHED: Apr 22, 2016
NETWORK-WIDE AVERAGE RATINGS
  THIS REVIEWER: 87.16%
  MAKER/PUBLISHER: 88.62%

Our Thanks to Black Dog!
This item was provided by them for the purpose of having it reviewed on this KitMaker Network site. If you would like your kit, book, or product reviewed, please contact us.
View Vendor Homepage  More Reviews  

About Darren Baker (CMOT)
FROM: ENGLAND - SOUTH WEST, UNITED KINGDOM

I have been building model kits since the early 70ís starting with Airfix kits of mostly aircraft, then progressing to the point I am at now building predominantly armour kits from all countries and time periods. Living in the middle of Salisbury plain since the 70ís, I have had lots of opportunitie...

Copyright ©2018 text by Darren Baker [ CMOT ]. Images also by copyright holder unless otherwise noted. Opinions expressed are those of the author(s) and not necessarily those of Historicus Forma or Silver Star Enterprises. All rights reserved.


Reader Reviews
Do you own this item and want to review it? You can add your review of the item here. Please read the reader review instructions before posting.


Comments

Good review, Darren, thanks. Your photos are very helpful. I am really surprised that the bases' edges aren't smoother, more flat, and more elegant. There's no bevel design to the edges and that makes the bases look like they were chipped off a master resin pour and appear kind of homemade and cheap looking. Sure, sanding and puttying would fix the base edges, but really, even cheap wargaming resin bases have smooth edges that are straight and square. I was interested in this set, but your photos made me reconsider.
APR 22, 2016 - 12:43 PM
The bottom of the bases still needs to be sanded in the pictures. With that said I do really like them.
APR 22, 2016 - 10:09 PM
the czech brand "black-dog" is good products. but in resin.
APR 23, 2016 - 10:31 AM
To be fair, the Black Dog 1/35 Sci-Fi "Snowbeaver" post-WW2 mech walker kit I have has excellent resin quality and casting.
APR 24, 2016 - 05:37 AM
I like them.
APR 26, 2016 - 02:10 AM
Tip: Just hit enter to submit your reply!
   

What's Your Opinion?


PHOTOS
Click image to enlarge
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move
  • move