by Darkstar Miniatures
is a new range of acrylic metallic paints. They are formulated to dry permanently while remaining glossy and bright with no need for gloss clear coat. They are also designed to accept polishing to improve the sheen.
is a UK company that also makes 54mm and 75mm figures and busts in two series, Historical Figures and Fantasy Range. They also make Reaper paints and Darkstar pigments, ink washes, and now Molten Metals
carries Molten Metals
and kindly sent these two for review
DM301 - Brass
DM271 - Steel
These paints are packaged in soft 17ml squeeze bottles. The bottles are a nice design with a clean but dour appearance, not surprising considering the genre of Darkstar's clientele. The paint is the consistency that reminds me of Vallejo, or white glue for those who haven't used that brand. That makes it easy to control how much one squeezes out.
With a brush I applied the colors directly from the bottle to a variety of objects: metal orc; plastic cannon rounds and items from several manufacturers; resin figure. Only the resin figure was primed, and none of the other pieces were cleaned prior to applying the Molten Metal. (I like to demonstrate paints based on "rookie mistakes.") I tried airbrushing on the figure and expended shell. Let's see how they worked.
DM271 - Steel
This color went on the metal monster's shield and easily covered it completely. I also applied it to a Tamiya wire reel and a piece of sprue. The sprue was about 90% one-stroke-coverage. The wire reel needed the paint to be worked around a bit.
DM271 Steel is a dark shiny hue.
DM301 - Brass
This color is bright! I brushed it onto everything. One-stroke-coverage varied. The metal orc's helmet accepted the paint without any problem, as did the smaller shells. The larger black styrene expended round needed a second coat.
I also brushed it onto an old Tamiya GI. It covered well.
The figure had been primed with a satin paint. You can see that the brass did not cover well by brush.
Darkstar Miniatures states that for airbrushing the paint need only be thinned water-to-paint at 1 to 10. (Water only.) That ratio did not work well through my Aztec black nozzle, even when I upped the pressure to 25psi. I cut the paint to 1-to-4. The paint sprayed great! Even at 12psi it covered the figure and the big spent shell with no problem. Cleaning was good with just water, and complete with a window cleaner.
DM301 Brass is a very bright color.
Darkstar Miniatures claims this paint can be polished to a higher sheen after curing for 24 hours; at the time of this writing only seven hours have passed, so check back tomorrow for images of the polished product.
These paints are excellent for any modeling category and genre - military ordnance, Steampunk, railroad, antiquity, classic figures. Anything that needs raw metallics. Molten Metals is another straight sharp arrow in the quiver of modelers hunting for that perfect acrylic paint. Stored in neat bottles, the paint has a good consistency.
Applied to my satin-primed resin figure and unprimed, unwashed metal and styrene subjects, I judge that brushing Molten Metals covers as well (90%) with the first pass as other mainstream acrylic paints I have used. Airbrushing also performed highly satisfactorily, even though it required much more thinning than Darkstar instructions.
Applying Molten Metals over satin resisted coverage by brush painting.
There has been a dearth of quality metallic acrylic colors for too long and I praise Darkstar for bringing us this fine line. Highly recommended.
Please remember to tell vendors and retailers that you saw Molten Metals here - on